Click for details
FREE SHIPPING FOR ORDERS $35 AND UP
Click for details Facebook

VELCRO® Brand Fasteners - Hook Types

A guide to VELCRO® Brand Fasteners - Hook

This page was created to help our customers. iTapeStore.com offers many products, however, some are very specialized and may have significant minimum orders. If you do not see a product listed on our site, please contact us us at [email protected] as we can order whatever you need.

Hook 88 - Most common - sold with rubber based Sticky Back, Acrylic adhesive backed and Sew On products

  • Made from woven nylon
  • Sewable (recommended only with non-adhesive backed)
  • Temperature operating range (without adhesive!): -70° to 200°F
  • Better shear and peel than Hook 65, with similar tension.
  • Available with most VELCRO® Brand adhesives
  • Hydrophilic: performance loss when wet, absorbs some chemicals

Hook 65 - Same as Hook 88 except

  • Slightly high cycle life

  • Hook 81
    • Polyester hook: This is what should be used in marine applications as it will not absorb water like nylon based
    • Sewable
    • Available with adhesives

    VELCRO® Brand ULTRA-MATE® Brand Hook - molded hook fasteners
    We do not currently stock many of these but feel free to check by contacting us at [email protected]. Order minimums are usually around 250+ yards but vary widely by product. Lead times can be 7 days to 3+ weeks, also very dependent on the product.

    HTH = High Technology Hook

    HTH 888 - also known as VELCRO® Brand ONE-WRAP® Brand Fastener

    • 22 Hook
    • LDPE laminated to polyester loop 3610
    • Medium cycle life (around 500)
    • Applications: cable ties, cord control, soccer net ties, plant ties
    • Average peel strength 0.5 PIW
    • Average shear strength: 23 PSI
    • Operating range: 0-220° F
    • Not recommended for outdoor use

    HTH 805

    • Short nylon type 22 Hook
    • Fairly stiff hook
    • Recommended for applications requiring and adhesive backing
    • High cycle life with low pile knits
    • Use with loops: 3610, 3800 and 3905
    • Not recommended for sewing
    • Available with VELCRO® Brand adhesives: 72, 14, 15 and 19
    • Applications Include: ski pants cuffs, bowling shoe pads, portfolio closures, trach tabs

    HTH 830

    • Very Low Profile 29 Hook
    • Made from polypropylene
    • Low cycle life
    • Narrow closure application
    • Works with loops NWL 3310, Loop 3905
    • Manufactured with VELCRO® Brand adhesives: 15, 14
    • Hold disposable head reads in airline, disposable medical straps

    HTH 704

    • Tall polyester Hook 15 shape.
    • Good UV resistance (does well exposed to the sun)
    • Hydrophilic (deals with water).
    • Sewable
    • Recommended for use with Loop 9000
    • Applications include: diapers, marine straps

    HTH 705 - special order

    • Tall, Nylon Hook 15 Shape
    • NOT recommended for sewing
    • Recommend for use with Loop 1000, Loop 2000, Loop 3001, Loop 3003
    • Available with : 72, 14, 15 adhesives
    • Applications include: strap tips, signage

    HTH 706 - special order

    • Tall, Nylon co-polymer Hook 15 Shape
    • Strong closure than HTH 705
    • Recommend for use with Loop 1000, Loop 3001
    • Available with VELCRO® Brand adhesives: 72, 14, 15
    • Applications include: Tube holder on surgical drape

    HTH 711 - special order

    • Tall, high density, polyethylene 15 Hook
    • Lower cost, medium cycle life
    • Recommend for use with Loop 3003, LP 3200
    • Available with VELCRO® Brand adhesives: 14, 15, 19
    • Applications include: tube holder on surgical drape

    HTH 745 - special order

    • Tall, Nylon Hook 15 Shape
    • Sewable
    • Good cycle life
    • Similar performance to Hook 88
    • Recommend for use with Loop 1000, Loop 2000, Loop 3001, Loop 3003
    • Available with VELCRO® Brand adhesives: 72, 14, 15
    • Applications include: strap tips, knee braces, catheter straps, optical cases, leg immobilizers, wrist braces, tube holder, signage

    HTH 751 - special order

    • Very Tall nylon Hook 24
    • Very rigid, similar hold/gran to MVA#8 (Hook 511)
    • Recommend for use with Loop 1000 or tall non-wovens
    • Available with VELCRO® Brand adhesives: 14, 15
    • Applications include: Strap tips, Knee Braces,

    HTH 757 - special order

    • Very tall co-polymer Hook 24
    • Very strong hook engagement
    • Recommend for use with Loop 1000 or tall non-wovens
    • Typically very low cycle life
    • Available with VELCRO® Brand adhesives: 72, 14, 15
    • Applications include: bike visor pad attachment, ceiling panels in boats, holding scrubbing pad on mop

    HTH 758 - special order

    • HTH 751 with Loop 3200 laminated to the back
    • Very strong hook engagement, similar to MVA#8/Hook 511
    • Recommend for use tall non-wovens,
    • No adhesives for this based on the loop being the backing
    • Commonly used in automotive applications

    HTH 811 - special order

    • Low Profile type 22 Hook
    • Made from HDPE (High Density Polyethylene)
    • Economical/lower cost
    • Works well with loops: 3610, 3800 and 3905
    • Available with VELCRO® Brand adhesives: 15, 14 and 19
    • Bike helmets, surgical gowns, hot/cold pack closure, shoulder pads

    HTH 833 - special order

    • Very Low Profile 29 Hook
    • Made from nylon
    • Medium/high cycle life
    • Good memory
    • Use with Loops 3905 or 3610
    • Made with with VELCRO® Brand adhesives: 15, 14
    • Application ideas: intimate apparel, infant apparel, doll clothing

    HTH 841 - special order

    • Low Profile 99 Hook
    • Sew-able
    • Durable
    • Works with loop 400
    • Currently available with adhesive 43, more may be added
    • Possible applications: shoes, outerwear, medical braces

    HTH 845 - special order

    • Short 22 Hook
    • Nylon
    • Sew-able version of HTH 805
    • Works well with low pile knits: 3610, 3800, 3905, 4000
    • Manufactured with VELCRO® Brand adhesives: 15, 14, 72, 19

    HTH 848 - special order

    • 22 Hook
    • Made with a vinyl resin
    • Can be RF sealed to a vinyl without an adhesive
    • Recommended loop closure: 3607, 3906
    • Not available with adhesive
    • Single patient BP cuff, vinyl pouches, bike bumper cushions, air bladder pouches for computer cases

    HTH 855 - Discontinued

    • 22/29 Hook combination
    • Made with a zytel 6/6 resin
    • Back to Back hook with no adhesive layer
    • Works with low kits such as Loop 3610, Loop 3003, Loop 3905
    • Since it is back to back, there is no adhesive available
    • Applications: medical splints, adjustable strapping applications

    HTH 858 (Self Engaging Fastener) - special order

    • HDPE Hook with a flat top that snaps together
    • Good shear, very low peel
    • Produced with VELCRO® Brand adhesive 19

    HTH 886 - special order

    • 22 Hook
    • Made from nylon resin laminated to Loop 3200 (polyester)
    • Low profile fastener
    • Works well as an anchor for foam molding
    • Hook side engages to loop backed sandpaper discs

    HTH 887 - special order

    • 22 Hook
    • Polypropylene to Polyester Loop 3200
    • Similar properties and applications to HTH 886

    HTH 889 - special order

    • Fire retardant version of the VELCRO® Brand ONE-WRAP® Brand fasteners and straps
    • Made from FR polypropylene laminated to FR Loop 3800
    • Passes UL V2-94 rating and NEC Section 300 -22Para C & D, FAR 25.853A/B

    HTH 890 - VELCRO® brand BUNDLE TIE

    • 29 Hook
    • Polyethylene hook to polyester NWL 3310
    • Cycle life is around 20 to 25
    • Printable
    • Applications include: flower wraps, produce wraps, product ties downs in packaging

    HTH 893 - hook for VELCRO® Brand QWIK-TIE Strap

    • 29 Hook
    • Low density polethylebe (LDPE)

    HTH 896 - hook for FR VELCRO® Brand QWIK-TIE Strap - special order

    • 29 Hook
    • Passes UL V2-94 & NEC Section 300-22
    • Use in air handling spaces

    HTH 883 - special order

    • VELCRO® Brand ONE-WRAP® Straps or linear fasteners with flat end zones on the edges
    • Has an easy peel when cut across machine direction
    • Applications: wire harness ties in automotive, wire shields in automotive

    HTH 895

    • VELCRO® Brand QWIK-TIE Strap with flat end zones on the edges
    • Strap the has an easy peel when cut across machine direction
    • Applications: wire harness ties in automotive,

    HTH 879 - special order

  • VELCRO® Brand FLEX-ZONE™ made from Loop 3905 and CMF29 (PP)