Click for details
FREE SHIPPING FOR ORDERS $35 AND UP
Click for details Facebook

Cut-To-Size Services Available! Email [email protected]

3M™ 5590H Heat Transfer Thermal Pads
3M™ 5590H Heat Transfer Thermal Pads

3M™ 5590H Heat Transfer Thermal Pads

Your Price: $31.90
Part Number:5590_9.44x1ft
  • Size:9.44" x 1 foot
  • Conductivity:3.0 W/m-K
Quantity Pricing
Quantity
Price
  • 1 - 6
  • $31.90
  • 7 - 19
  • $25.52
  • 20 - 32
  • $20.74
  • 65+
  • $14.36
3M™ Thermally Conductive Acrylic Interface Pad 5590H-05 is a soft acrylic elastomer based interface pad. It has high thermal conductivity, good electrical insulation properties and is ideally suited for applications that require non-silicone properties.  Because of its softness, Interface Pad 5590H can decrease the load to integrated circuit chips during compression, and have good tack to many surfaces. These properties lead to a high performance non-silicone based thermal pad. Interface Pad 5590H is a higher thermal conductivity and somewhat firmer acrylic thermal pad, versus Interface Pad 5589H.

Details
  • Size: 9.44" x 12"
  • Thickness: 0.5 mm (Also available by the Roll - 1.0 mm, 1.5 mm)
  • Good softness and conformability to non-flat surfaces
  • Excellent compressive stress relaxation
  • Non-silicone acrylic elastomer
  • Good dielectric performance
  • Good surface tack leads to low thermal resistance at surface
  • Excellent durability for long term thermal conductivity and electric insulation stability
  • Precut pads offered, we can order 240mm x 20m or 300mm x 20m Roll and we can custom laser and die cut - forward quantity and dimensions or drawing
  • Or we can price an uncut roll of 5590H-05, 250 mm x 20 m or 300 mm x 20 m or other thicknesses - just email us at [email protected]

Applications
  • Heat transfer in consumer electronics and automotive electronic products
  • Decrease of compression stress to electronic parts by thermal pad conformability

Examples
  • Heat transfer between PCB and heat sink
  • Thermal management in automotive EV batteries
  • Power electronics component thermal management
  • Chip on film (COF) heat conduction
  • Automotive electronics
  • LED thermal management
  • General gap filling in electronic devices


CUT-TO-SIZE CONVERTING SERVICES AVAILABLE
Contact us for other options, questions or to inquire about our Cut-To-Size Services at [email protected]

Related Items

Recently Viewed Items