A clean, reliable way to hang, organize, and declutter - without damaging your walls
Command™ Hooks & Strips offer a safe, no-mess alternative to nails, screws and other traditional mounting hardware. 3M™'s stretch-release adhesive bonds securely to most interior surfaces and comes off easily when it's time to move or redecorate. The range of products varies from tiny wire hooks for lightweight accessories to more rugged options rated for 15 lbs of hold strength.
Why Choose Command™ Hooks & Strips?
Command™ mounting products allow you to suspend things without using a drill or hammer. The pressure-sensitive adhesive adheres to painted walls, ceramic tile, laminated surfaces, sealed wood, glass and other similar surfaces. The stretch-release backing material supports static loads but can be easily peeled away with no spalling or traces of any kind.
Use them for everyday organization, seasonal décor, or temporary signage. If drilling is not allowed or the substrate would crack under a fastener, Command™ products solve that problem.
Common applications:
- Hanging utensils, potholders, oven mitts, and lightweight cookware in kitchens
- Storing brooms, dustpans, and cleaning tools in cupboards or pantries
- Hanging towels, robes, and accessories in bathrooms
- Organizing cables, small electronics, and office supplies
- Mounting decorations in dorm rooms, rentals, and classrooms
Technical Specifications
Command™ Hooks & Strips use a synthetic rubber-based pressure-sensitive adhesive engineered for indoor environments.
- Temperature range: 50°F to 105°F (10°C–40°C) for optimal performance
- Compatible surfaces: Painted drywall, varnished/finished wood, laminates, sealed tile, metal, glass
- Avoid: Unfinished wood, brick, unpainted concrete, LSE plastics (polyethylene, polypropylene)
- Load capacity: 0.5 lb to 15 lbs depending on the product line
- Moisture: Standard products suit typical indoor humidity; the Command™ Bath line adds moisture resistance
These are suitable for stationary vertical loads. Dynamic forces, shear shock, or heavy leverage at an angle can reduce holding power, so do not hang anything that swings.
Custom Converting Options
If you need Command™-compatible adhesive in a non-standard format, iTapeStore offers:
- Custom-cut strips for mounting displays, signage, or lightweight fixtures
- Slit-to-width rolls for prototyping or production assembly
- Small-run batches with no minimum order quantities
All converting happens in the USA with precision slitting and die-cutting that preserves adhesive integrity and dimensional accuracy.
Application Guide
Getting the strongest bond takes a bit of patience:
- Prep the surface. Wipe it down with isopropyl alcohol (skip the household cleaners as they leave film). Let it dry completely.
- Apply the strip. Press firmly for a full 30 seconds. You want full adhesive contact.
- Wait before loading. Give it at least one hour before you hang anything.
- Removal. Hold the hook base flat against the wall and pull the tab straight down. The strip stretches and releases without pulling paint with it.
Newly painted walls should be left for a week before you put these on. And always pull the tab downward, never outward as any outward pulling will stress the paint layer.
Frequently Asked Questions
Are Command™ Hooks & Strips removable?
Yes. When used as directed, the stretch-release adhesive will come off cleanly, leaving no residue or damage to the wall.
What is the most weight a Command™ hook can hold?
That all depends on the product. Small wire hooks can support around half a pound. Medium utility hooks are capable of supporting 3 lbs. The XL heavyweight line handles up to 15 lbs, suitable for a backpack, step ladder, or heavy jacket.
Do they work on textured walls?
Lightly textured surfaces may work. Anything with a lot of texture such as brick, rough concrete, or stucco won't provide enough contact for the adhesive.
Can they be used in bathrooms?
Yes, but only the Command™ Bath line of products. Those versions are built with added moisture resistance that the standard hooks lack.
Will they stick to powder-coated metal?
Typically, yes. The coating must be smooth, clean, and fully cured. Before you apply the strip, wipe it down with isopropyl alcohol.